SERVICE WORK ON THE CHASSIS 12
73
F01189-11
–
Position the fuel tank.
–
Position the intake flange on the throttle valve body.
–
Tighten hose clamp
2
.
F01166-11
–
Plug in connector
3
.
–
Position engine breather hose
4
.
F01165-11
–
Mount and tighten screws
5
on both sides.
Guideline
Screw, fuel tank M8
15 Nm (11.1 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
6
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Attach the fuel tank breather hose.
F01168-10
–
Thoroughly clean the plug-in connection of the fuel line using
compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Remove the wash cap set. Lubricate the O-ring and connect
plug-in connection
7
for the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
