KTM F9903U4, Руководство пользователя

Страница: 149 / 192

ELECTRICAL SYSTEM 16
147
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. ( p. 147)
16.13 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 146)
F00892-10
Main work
–
Turn adjusting wheel
1
to adjust the headlight range.
Info
Turn counterclockwise to increase the headlight range;
turn clockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
400726-11
–
Set the headlight to marking
B
.
Guideline
The light-dark boundary must lie exactly on lower mark-
ing
B
when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
16.14 Diagnostics connector
E02236-10
The diagnostics connector
1
is at the rear part of the vehicle.
(SUPER ADVENTURE S CN)
A diagnostic adapter for connection to a cross-manufacturer
diagnostic interface has been connected at the factory.
Info
Unplug the diagnostics adapter to use the KTM diag-
nostics tool.
Following completion of the diagnosis, plug the diag-
nostics adapter back in.
16.15 Accessories circuit 1 and accessories circuit 2 front
E02300-10
Installation location
–
Accessories circuit 1
1
and accessories circuit 2
2
at the
front are located behind the right mask spoiler.