KTM F9903U4, Руководство пользователя

Страница: 133 / 192

WHEELS, TIRES 15
131
Main work
–
Check the rear hub damping rubber pieces. ( p. 132)
S01639-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal ring
1
and contact surface
A
of
the spacer.
Long-life grease ( p. 180)
–
Insert a spacer.
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease ( p. 180)
–
Mount the damping rubber pieces and rear sprocket carrier on
the rear wheel.
–
Place the rear wheel in the link fork and engage the brake disc
in the brake caliper.
E02268-10
–
Mount wheel spindle
2
, but do not push it in all the way.
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
E02269-10
–
Push wheel spindle in all the way and mount chain
adjuster
4
and nut
5
.
Info
Mount chain adjusters
3
and
4
in the same posi-
tion.
–
Make sure that the chain adjusters are fitted correctly on the
adjusting screws.
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
B
.
–
Tighten nut 5 .
Guideline
Nut, rear wheel
spindle M25x1.5 90 Nm (66.4 lbf ft)
Thread greased