KTM F8203S2, Инструкции по установке

Страница: 31 / 48

WORK 3
29
–
Pull holding bracket
4
forward and remove battery toward
the top.
3.14 Installing the battery
H00386-10
Main work
–
Insert the battery into the battery compartment with the termi-
nals facing forward and secure with holding bracket
1
.
(EXC
‑
F EU/AU/US, EXC
‑
F Six Days EU)
Battery (HJTZ5S-FP-C)
(All BR models)
Battery (YTX5L-BS)
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Connect positive cable
3
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm
(1.84 lbf ft)
–
Slide positive terminal cover
7
over the positive terminal.
–
Connect negative cable
4
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm
(1.84 lbf ft)
Contact disks
A
must be mounted under screws
5
and
cable sockets
6
with the claws toward the battery termi-
nal.
Finishing work
–
Mount the seat. ( p. 27)
3.15 Recharging the battery (EXC
‑
F EU/AU/US, EXC
‑
F Six Days EU)
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.