KTM F8203S2, Инструкции по установке

Страница: 17 / 48

SETUP 2
15
E00489-10
–
Mount and tighten screw
bl
with the collar bushing.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screw
bm
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screw
bn
with negative cable and con-
tact disk.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
E00498-10
–
Join the plug-in connector of the tail light with the plug-in
connector of the turn signal wiring harness.
–
Mount engine electronics control unit on the holder.
Info
The wiring harness runs under the engine electron-
ics control unit.
E00487-10
–
Position the main silencer. Mount screws
9
with the
washers, but do not tighten yet.
–
Attach spring
8
.
Spring hook (5030501700004)
–
Tighten screws
9
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
E00494-10
–
Attach the side cover in area
A
and engage it in area
B
.
–
Mount and tighten screw
7
.
Guideline
Screw, sub-
frame M8 35 Nm (25.8 lbf ft)
Loctite ® 2701™
–
Mount and tighten screw
6
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Install the battery. ( p. 29)
–
Install the fuel tank. ( p. 34)