KTM F7103U6, Инструкции по установке

Страница: 6 / 47

2 SETUP
4
H02474-10
(150 EXC TPI EU)
–
Position the turn signal indicator lamp
1
in the com-
bination instrument bracket.
E00850-10
Condition
Packaging V12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
have finished.
–
Remove and unpack the separate enclosure and compo-
nents. Check that the scope of supply is complete using
the enclosed packing list.
–
Have a lift stand available.
Lift stand (78129955100)
–
Remove the two cable ties on the triple clamp.
402051-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle and components for transport damage.
–
Install the shock absorber. ( p. 22)
H02537-10
(150 EXC TPI EU)
–
Position the connector retainer and combination instru-
ment on the upper triple clamp.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis M6 10 Nm
(7.4 lbf ft)