KTM F7103U6, Инструкции по установке

Страница: 15 / 47

SETUP 2
13
S03684-01
–
Feed the wiring harnesses through the opening.
–
Position the license plate holder on the rear.
S03685-10
–
Mount and tighten screw
bn
with the collar bushing.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screw
bo
.
Guideline
Remaining screws,
chassis EJOT PT ®
K60x25
‑
Z
2 Nm (1.5 lbf ft)
S03686-10
–
Join the plug-in connectors of tail light
bt
and turn signal
cable harness
ck
with the wiring harness.
Info
Pay attention to routing of the wiring harnesses.
–
Install the rear left side cover. ( p. 31)
–
Install the air filter box cover. ( p. 30)
–
Install the 12-V battery. ( p. 28)
R01229-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.