KTM Chassis 690 SMC, Руководство пользователя

Страница: 147 / 186

TROUBLESHOOTING
145
Faults Possible cause Action
The engine does not turn when the
starter button is pressed Operating error
–
Carry out the start procedure. ( p. 41)
Battery discharged
–
Recharge the battery. x ( p. 109)
–
Check the cause of discharging.
Fuse 1 , 2 , 3 or 4 is blown
–
Change the fuses of power consumers.
( p. 113)
Main fuse burned out
–
Changing the main fuse. ( p. 111)
Ignition/steering lock or emergency
OFF switch defective
–
Have ignition/steering lock or emergency OFF
switch checked.
Defect in safety start system
–
Have the safety start system checked.
No ground connection present.
–
Check the ground connection.
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift gear to neutral.
The vehicle is in gear and the side
stand is folded out
–
Shift gear to neutral.
Defect in safety start system
–
Have the safety start system checked.
Engine turns although a gear is
engaged Defect in safety start system
–
Have the safety start system checked.
Engine turns but does not start. Operating error
–
Carry out the start procedure. ( p. 41)
Fuse 4 blown
–
Change the fuses of power consumers.
( p. 113)
Coupling of fuel hose connection not
connected
–
Reconnect coupling of fuel hose connection.
Socket connector of cable harness oxi-
dized
–
Clean socket connector and treat it with contact
spray.
Defect in fuel injection system
–
Read the error memory with the KTM diagnostics
tool and correct the fault.