KTM Chassis 690 SMC, Руководство пользователя

Страница: 109 / 186

MAINTENANCE WORK ON CHASSIS AND ENGINE
107
9.54
Mounting the seat
100276-10
–
Hook slot

of the seat onto screw

, press the rear downward and at the same time
push it forward.
–
Push locking pin

into lock housing

and push the back of the seat down until the
locking pin locks in place with an audible click.
–
Finally, check that the seat is correctly mounted.
9.55
Removing the battery
x
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a physician.
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. ( p. 106)