KTM Chassis 690 SMC, Руководство пользователя

Страница: 44 / 186

RIDING INSTRUCTIONS
42
100239-10
–
Turn the emergency OFF switch to the position .
–
Switch on the ignition by turning the ignition key to position ON .
After you switch on the ignition, you can hear the fuel pump working for about 2
seconds. At the same time, the function test of the combination instrument is run.
–
Shift gear to neutral.
The green idling speed indicator lamp N

lights up.
–
Press the electric starter button .
Info
Do not press the electric starter button until the function test of the combination
instrument is finished.
When starting,
DO NOT open the throttle. If you open the throttle during the start-
ing procedure, fuel is not injected by the engine management system and the
engine cannot start.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds before
trying again.
This motorcycle is equipped with a safety start system. You can only start the
engine if the gearbox is in neutral or if the clutch is pulled when a gear is
engaged. If the sidestand is folded out and you shift into gear and release the
clutch, the engine stops.
–
Take the weight off the side stand and swing it back up with your foot as far as it will
go.