KTM 85 SX 2004, Руководство по ремонту

Страница: 66 / 89

6-11
Mounting cylinder head
– Clean cylinder and cylinder head sealing surface, place O-rings in
grooves.
– Mount cylinder head with water nozzle on the exhaust side.
– Oil the collar nuts 1 at threads and contact faces.
– Mount the collar bolts with new copper gaskets and tighten them
crosswise, taking three turns to achieve the total tightening torque of
10 Nm.
– In first stage, only tighten until slight resistance is felt.
Mounting the intake flange and reed valve housing
– Mount a gasket and insert the reed valve housing in the intake port.
– Tighten the intake flange to 6 Nm.
Mounting engine sprocket
– Lubricate O-ring
2
with oil and slide over counter shaft.
– Slide distance bushing
3
in position so that O-ring is in correct
position
A
.
– Mount the engine sprocket with the collar facing inwards on the
countershaft and fix with circlip 4 .
1
A
2
3
4