KTM 85 SX 17/14, Руководство пользователя

Страница: 26 / 96

9 SERVICE SCHEDULE
24
9.1 Service schedule
Every 40 operating hours
Every 20 operating hours/after every race
Once after 10 operating hours / Every 10 operating hours
Change the gear oil.
x
( p. 73)
○ ● ●
Check the front brake linings. ( p. 55)
○ ● ●
Check the rear brake linings. ( p. 59)
○ ● ●
Check the brake discs. ( p. 53)
○ ● ●
Check the brake lines for damage and leakage.
○ ● ●
Change the foot brake cylinder seals.
x
● ●
Check the rear brake fluid level. ( p. 58)
○ ● ●
Check the free travel of the foot brake lever. ( p. 57)
○ ● ●
Check the frame and swingarm. x
● ●
Check the swingarm bearing.
x
● ●
Check the heim joints at the top and bottom of the shock absorber.
x
● ●
Perform a fork service.
x
●
Perform a shock absorber service.
x
●
Check the tire condition. ( p. 64)
○ ● ●
Check the tire air pressure. ( p. 65)
○ ● ●
Check the wheel bearing for play.
x
● ●
Check the wheel hubs. x
● ●
Check the rim run-out. x
○ ● ●
Check the spoke tension. ( p. 65)
○ ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 47)
○ ● ●
Check the chain tension. ( p. 46)
○ ● ●
Grease all moving parts (e.g., hand lever, chain, ...) and check for smooth operation. x
○ ● ●
Check the fluid level of the hydraulic clutch. ( p. 51)
○ ● ●
Check the front brake fluid level. ( p. 54)
○ ● ●
Check the free travel of the hand brake lever. ( p. 53)
○ ● ●
Check the play of the steering head bearing. ( p. 38)
○ ● ●
Change pistons and check cylinders.
x
● ●
Change pistons and check cylinders. (in difficult operating conditions)
x
● ● ●
Change the connecting rod, conrod bearing, and crank pin.
x
●
Change the crankshaft bearing.
x
●
Check the transmission and shift mechanism.
x
●
Change the spark plug. x
● ●
Change the spark plug connector. x
●
Check the intake membrane.
x
● ●
Check the exhaust control for functioning and smooth operation.
x
● ●
Check the clutch.
x
● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect routing.
x
○ ● ●
Check the antifreeze and coolant level. ( p. 66)
○ ● ●
Check the cables for damage and routing without sharp bends.
x
○ ● ●
Check that the cables are undamaged, routed without sharp bends and set correctly.
● ●
Clean the air filter and air filter box. x
○ ● ●
Change the glass fiber yarn filling of the main silencer. x ( p. 43)
●
Check the screws and nuts for tightness.
x
○ ● ●
Check idle.
x
○ ● ●
Final check: Check the vehicle for safe operation and take a test ride.
○ ● ●
Make the service entry in
KTM DEALER.NET
and in the service record. x
○ ● ●