KTM 85 SX 17/14, Руководство пользователя

Страница: 65 / 96

13 WHEELS, TIRES
63
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screws
3
.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 32)
13.3 Removing the rear wheel
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 32)
C00268-10
Main work
–
Remove nut
1
.
–
Remove chain adjuster
2
. Withdraw wheel spindle
3
only enough to allow the rear
wheel to be pushed forward.
–
Push the rear wheel forward as far as possible.
–
Holding the rear wheel, withdraw the wheel spindle. Remove the chain from the
rear sprocket.
–
Take the rear wheel out of the swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
L00096-10
–
Remove spacers
4
.
13.4 Installing the rear wheel
x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
L00096-11
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing. x
–
Clean and grease shaft seal rings
1
and bearing surface
A
of the spacers.
Long-life grease ( p. 88)
–
Insert the spacers.