KTM 85 SX 17/14 Скачать руководство пользователя

Страница: 19 / 96

PREPARING FOR USE

7.4

Preparing for rides on dry sand

L00021-10

–

Check the radiator cap.

Value on radiator cap

1.8 bar (26 psi)

» If the displayed value does not meet specifications:

Warning

Danger of scalding

During motorcycle operation, the coolant gets

very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.

–

Change the radiator cap.

B00435-01

–

Fit a dust cover on the air filter.

Dust protection device for air filter (59006019000)

Info

See the

KTM PowerParts

fitting instructions.

B00436-01

–

Fit a sand cover on the air filter.

Sand protection device for air filter (59006022000)

Info

See the

KTM PowerParts

fitting instructions.

–

Adjust the carburetor jetting and the setting.

Info

Your authorized KTM workshop can recommend the right carburetor tuning.

600868-01

–

Clean the chain.

Chain cleaner (

p. 88)

–

Fit the steel sprocket.

Tip

Do not grease the chain.

–

Clean the radiator fins.

–

Straighten bent radiator fins carefully.

–

If used in sand regularly, replace the piston every 10 operating hours.

7.5

Preparing for rides on wet sand

L00021-10

–

Check the radiator cap.

Value on radiator cap

1.8 bar (26 psi)

» If the displayed value does not meet specifications:

Warning

Danger of scalding

During motorcycle operation, the coolant gets

very hot and is under pressure.

–

Содержание 85 SX 17/14

































































































Результаты поиска

Содержание 85 SX 17/14

Отзывы:

Похожие инструкции для 85 SX 17/14

Бренды по названию

Популярные бренды

KTM 85 SX 17/14, Руководство пользователя

Результаты поиска

Содержание 85 SX 17/14

Отзывы:

Похожие инструкции для 85 SX 17/14

Бренды по названию

Популярные бренды