KTM 85 SX 17/14, Руководство пользователя

Страница: 45 / 96

11 SERVICE WORK ON THE CHASSIS
43
11.27 Sealing the air filter box
x
401527-10
–
Seal the air filter box in marked area
A
.
11.28 Removing the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
C00470-10
–
Remove screw
1
.
–
Pull the main silencer off of the manifold at rubber sleeve
2
.
11.29 Installing the main silencer
C00470-11
–
Mount the main silencer with rubber sleeve
1
.
–
Mount and tighten screw
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.30 Changing the glass fiber yarn filling of the main silencer
x
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over a period, the fibers of the glass fiber yarn vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the main silencer. ( p. 43)