KTM 690 Enduro R AUS 2013, Инструкция по настройке

Страница: 13 / 17

3 WORK
11
400405-10
–
Switch off the engine.
–
Open the filler cap. ( p. 8)
–
Fill the fuel tank with fuel up to measurement
A
.
Guideline
Measurement
A
20 mm (0.79 in)
Total fuel tank
capacity, approx. 12 l (3.2 US gal) Super unleaded (ROZ 95/RON 95/PON
91) (
p. 14)
–
Close the filler cap. ( p. 8)
B00104-10
–
Press the SET button
2
for two seconds.
The fuel level warning lamp
1
switches off. TRIP F is set to 0.0 and the display
returns to the previous display mode.
Info
If you do not press the SET button
2
, the reset takes place automatically
after approx. three minutes.
3.14 Setting the clock
Condition
The motorcycle is stationary.
400838-01
–
Switch on the ignition by turning the ignition key to position ON .
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
–
Keep the
MODE
button and the
SET
button pressed simultaneously.
The time is set.
3.15 Setting kilometers or miles
Info
If you change the unit, the value is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is stationary.
400839-01
–
Switch on the ignition by turning the ignition key to position
ON
.
–
Press the
MODE
button repeatedly until the
ODO
mode is active.
–
Keep the
MODE
button pressed until the display mode changes from
km/h
to
mph
or
from
mph
to
km/h
.
Guideline
Activation duration of MODE button 10 s