KTM 690 Enduro R AUS 2013, Инструкция по настройке

Страница: 15 / 17

4 TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS
13
Screw, steering stem M8 20 Nm (14.8 lbf ft)
–
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Engine carrying screw M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
Remaining nuts, chassis M10 45 Nm (33.2 lbf ft)
–
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
–
Screw, bottom shock absorber M10 45 Nm (33.2 lbf ft) Loctite
®
243™
Screw, engine bearer on frame M10 45 Nm (33.2 lbf ft)
–
Screw, handlebar support M10 40 Nm (29.5 lbf ft) Loctite
®
243™
Screw, side stand M10 35 Nm (25.8 lbf ft)
Loctite
®
243™
Screw, top shock absorber M10 45 Nm (33.2 lbf ft) Loctite
®
243™
Screw, swingarm pivot M12 80 Nm (59 lbf ft)
–
Lambda sensor M12x1.25 25 Nm (18.4 lbf ft) Copper paste
Nut, linkage lever on swingarm M14x1.5 100 Nm (73.8 lbf ft)
–
Nut, linkage lever to rocker arm M14x1.5 100 Nm (73.8 lbf ft)
–
Screw, bottom steering head M20x1.5 60 Nm (44.3 lbf ft)
Loctite
®
243™
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Screw, front wheel spindle M24x1.5 45 Nm (33.2 lbf ft)
–
Nut, rear wheel spindle M25x1.5 90 Nm (66.4 lbf ft)
–