3
WORK
8
3.5
Installing the battery
601812-11
Main work
–
Slide the battery into the battery holder.
Info
The battery terminals must be at the rear.
–
Attach the positive cable and mount positive terminal cover
1
.
–
Position retaining bracket
2
.
–
Mount and tighten screws
3
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
–
Plug in connector
4
.
–
Attach the minus cable .
Finishing work
–
Mount the seat. (
–
Set the clock. (
3.6
Opening the filler cap
Danger
Fire hazard
Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Warning
Danger of poisoning
Fuel is poisonous and a health hazard.
–
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
Store fuel properly in a suitable canister and keep away from children.
Warning
Environmental hazard
Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to get into the ground water, the ground, or the sewage system.
601770-10
–
Lift the cover of filler cap
1
and insert the ignition key.
–
Turn the ignition key 90° counterclockwise and remove the filler cap.
Info
The filler cap has a fuel tank breather.
3.7
Closing filler cap
601771-01
–
Put the filler cap back on and turn the ignition key 90° clockwise.
–
Remove the ignition key and fold down the cover.
