KTM 690 Enduro R 2017, Инструкции по установке

Страница: 5 / 20

2 SETUP
3
2.1 Unpacking and setting up the vehicle
S01530-10
–
Remove the straps and box.
S01531-10
–
Remove the adhesive tape in the upper area of the motorcycle.
S01532-10
–
Roll down the film at the sides.
Info
To avoid damaging the motorcycle during unpacking, leave the other films
on the vehicle until you have finished work on the vehicle.
–
Remove the separate enclosure and unpack it. Check the separate enclosure for
completeness.
–
Check the vehicle for transport damage.
S01533-10
–
Remove the screws and handlebar clamps.
S00795-10
–
Remove screw
1
of the right hand guard.
S00796-10
–
Position the controls on the right half of the handlebar.
Info
The figure shows how to route the cable and lines.
–
Mount the screws.