KTM 690 Enduro R 2017, Инструкции по установке

Страница: 13 / 20

3 WORK
11
3.7 Closing filler cap
601771-01
–
Put the filler cap back on and turn the ignition key 90° clockwise.
–
Remove the ignition key and fold down the cover.
3.8 Removing rear fairing
Preparatory work
–
Remove the seat. ( p. 7)
S00805-10
Main work
–
Remove screws
1
.
100314-10
–
Remove screws 2 .
–
Open the filler cap. ( p. 10)
–
Take off the rear fairing.
–
Close the filler cap. ( p. 11)
3.9 Fitting the rear fairing
S00806-10
–
Position the license plate holder and cable harness.
–
Open the filler cap. ( p. 10)
–
Position the rear fairing and grab handles
1
as shown in the figure. Fit and
slightly tighten the screws of the grab handles.
–
Close the filler cap. ( p. 11)
S00811-11
–
Mount and tighten the rear fairing fixing screws
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)