KTM 690 Enduro R 2017, Инструкции по установке

Страница: 14 / 20

3 WORK
12
S01536-10
–
Mount and tighten screws
3
.
–
Tighten the screws of the grab handles.
Guideline
Screw, grab handle M8 10 Nm (7.4 lbf ft)
–
Mount the seat. ( p. 7)
3.10 Mounting rear footrest bracket
Info
The operations are the same for the left and right sides.
S00807-10
–
Position the footrest bracket
1
. Mount and tighten screws
2
.
Guideline
Screw, rear footrest bracket M8x16 25 Nm
(18.4 lbf ft)
3.11 Mounting the rubber strap for the side stand
0 0 1 1
B00246-10
–
Drill a hole of the specified size at marking
1
.
Guideline
Hole diameter for rubber strap 8.0 mm (0.315 in)
Info
A marking
1
is found on the inside of the left heel protector.
–
Mount the rubber strap.
3.12 Mounting heel protector
Info
The operations are the same for the left and right sides.
S00808-10
Warning
Forfeiture of homologation and insurance cover The vehicle is homologated
as 2-seater. If the heel protector is fitted instead of the footrest bracket, the
vehicle no longer conforms to the homologation and must not be operated in
this form without alterations to the registration papers.
–
Set up and operate the vehicle as a 2-seater or have changes made to
the registration papers.
–
Position the heel protector 1 . Mount and tighten screws 2 .
Guideline
Screw, heel protector M8x12 5 Nm
(3.7 lbf ft) Loctite ® 243™