KTM 500 EXC AUS, Руководство пользователя

Страница: 97 / 119

17 SERVICE WORK ON THE ENGINE
95
C00068-10
–
Push the engine oil screen with the O-rings onto a pin wrench.
–
Push the pin wrench through the opening into the drill hole of the opposite engine
case wall and push the oil screen as far as possible into the engine case.
C00069-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, engine oil screen M20x1.5 15 Nm
(11.1 lbf ft)
–
Mount and tighten the oil drain plug
1
with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
C00070-10
–
Remove screws
5
. Remove the oil filter cover with the O-ring.
C00071-10
–
Pull oil filter
6
out of the oil filter housing.
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
C00072-10
–
Lay the motorcycle on its side and fill the oil filter housing to about
⅓
full with
engine oil.
–
Insert the oil filter in the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
7
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
–
Stand the motorcycle upright.
S00041-10
–
Remove the oil filler plug
8
with the O-ring from the clutch cover and fill up with
engine oil.
Engine oil 1.5 l (1.6 qt.) Engine oil (SAE 10W/50) ( p. 109)
Alternative engine
oil for harsh oper-
ating conditions
and increased per-
formance Engine oil
(SAE 10W/60)
(00062010035)
( p. 109)
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.