11
SERVICE WORK ON THE CHASSIS
62
11.38
Adjusting the chain guide
x
101362-10
–
Remove the nut of screw
1
.
–
Remove screws
1
and
2
. Take off the chain guide.
Condition
Number of teeth:
≤
44 teeth
–
Insert nut
3
in hole
A
. Position the chain guide.
–
Mount and tighten screws
1
and
2
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
–
Mount the nut on screw
1
and tighten.
Guideline
Remaining nuts, chassis
M6
10 Nm
(7.4 lbf ft)
Condition
Number of teeth:
≥
45 teeth
–
Insert nut
3
in hole
B
. Position the chain guide.
–
Mount and tighten screws
1
and
2
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
–
Mount the nut on screw
1
and tighten.
Guideline
Remaining nuts, chassis
M6
10 Nm
(7.4 lbf ft)
11.39
Checking the frame
x
401340-01
–
Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
11.40
Checking the swingarm
x
401341-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
