KTM 500 EXC AUS, Руководство пользователя

Страница: 65 / 119

11 SERVICE WORK ON THE CHASSIS
63
11.41 Checking the throttle cable routing
Preparatory work
–
Remove the seat. ( p. 53)
–
Remove the fuel tank.
x
( p. 56)
101491-10
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed side by side behind the handlebars and
above the fuel tank bearing to the throttle valve body.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the fuel tank.
x
( p. 57)
–
Mount the seat. ( p. 53)
11.42 Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
» If a rubber grip is damaged, worn or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) ( p. 112)
11.43 Additionally securing the rubber grip
Preparatory work
–
Check the rubber grip. ( p. 63)
401198-01
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rub-
ber grip.