11
SERVICE WORK ON THE CHASSIS
53
11.20
Removing the seat
101346-10
–
Remove screw
1
.
–
Lift up the seat at the rear, pull it back and then remove it from above.
11.21
Mounting the seat
S00033-10
–
Hook in the front of the seat at the collar sleeve of the fuel tank, lower it at the rear
and simultaneously push it forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
11.22
Removing the air filter box lid
S00031-10
–
Pull off the air filter box lid in area
A
to the side and remove to the front.
11.23
Installing the air filter box lid
S00031-11
–
Insert the air filter box lid into the rear area
A
and clip it into the front area
B
.
11.24
Removing the air filter
x
Note
Engine failure
Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
–
Remove the air filter box lid. (
