KTM 450 SX-F 2017, Руководство пользователя

Страница: 87 / 125

15 COOLING SYSTEM
85
15.1 Cooling system
V00299-10
Water pump
1
in the engine circulates the coolant.
The pressure resulting from the warming of the cooling system is regulated by a valve
in radiator cap
2
. This ensures that operating the vehicle at the specified coolant
temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cool-
ing effect.
15.2 Checking the antifreeze and coolant level
Warning
Danger of scalding
During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the cooling system are at
operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses or other components
of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
400243-10
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the radiator cap.
–
Check the antifreeze in the coolant.
−
25…
−
45 °C (
−
13…
−
49 °F)
» If the antifreeze in the coolant does not match the specified value:
–
Correct the antifreeze in the coolant.
–
Check the coolant level in the radiator.
Coolant level A above the radiator
fins
10 mm (0.39 in)
» If the coolant level does not match the specified value:
–
Correct the coolant level.
Coolant ( p. 112)
–
Mount the radiator cap.