KTM 450 SX-F 2017, Руководство пользователя

Страница: 40 / 125

10 TUNING THE CHASSIS
38
Guideline
Rebound damping (SX
‑
F EU)
Comfort 20 clicks
Standard 17 clicks
Sport 14 clicks
Rebound damping (SX
‑
F US)
Comfort 20 clicks
Standard 17 clicks
Sport 12 clicks
Rebound damping (XC
‑
F US)
Comfort 15 clicks
Standard 12 clicks
Sport 10 clicks
Rebound damping (SX
‑
F Factory Edition)
Comfort 17 clicks
Standard 12 clicks
Sport 7 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection cap
1
.
10.16 Handlebar position
H01188-10
The holes on the handlebar supports are placed at a distance of
A
from the center.
Hole distance A 3.5 mm (0.138 in)
The handlebar can be mounted in 2 different positions. In this way, the handlebar can
be mounted in the most comfortable position for the rider.
10.17 Adjusting the handlebar position
Preparatory work
–
Remove the handlebar cushion.
H01189-10
Main work
–
Remove screws 1 . Remove the handlebar clamp. Remove the handlebar and lay it
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
2
. Take off handlebar supports
3
.
–
Position rubber bushings
4
and push through nuts
5
from below.
–
Place the handlebar supports in the required position.
Info
The handlebar supports are longer and higher on one side.
Position the left and right handlebar supports evenly.
–
Mount and tighten screws 2 .
Guideline
Screw, handlebar support M10 40 Nm
(29.5 lbf ft) Loctite ® 243™