KTM 450 SX-F 2017, Руководство пользователя

Страница: 97 / 125

17 SERVICE WORK ON THE ENGINE
95
17.3 Changing the engine oil and oil filter, cleaning the oil screens
Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Info
Drain the engine oil while the engine is at operating temperature.
Preparatory work
–
Park the motorcycle on a level surface.
V00303-10
Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug 1 with the magnet and seal ring.
V00304-10
–
Remove screw plug
2
with the short oil screen and the O-rings.
Info
Do not remove screw
A
.
V00305-10
–
Remove screw plug
3
with the long oil screen
4
and the O-rings.
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
V00304-11
–
Mount and tighten screw plug
2
with the short oil screen and the O-rings.
Guideline
Screw plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)