SETUP 2
15
E00487-10
–
Position the main silencer. Mount screws
9
with the
washers, but do not tighten yet.
–
Attach spring
8
.
Spring hook (5030501700004)
–
Tighten screws
9
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
E00494-10
–
Attach the side cover in area
A
and engage it in area
B
.
–
Mount and tighten screw
7
.
Guideline
Screw, sub-
frame
M8
35 Nm (25.8 lbf ft)
Loctite
®
2701™
–
Mount and tighten screw
6
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
–
Install the 12 V battery. (
–
Install the fuel tank. (
E00496-10
–
Position turn signal on both sides, mount nuts with wash-
ers and tighten.
–
Position license plate lamp on the license plate holder,
and mount and tighten screws
bq
.
–
Mount reflector
br
on license plate holder.
–
Pass cable through the license plate holder.
E00497-10
–
Position the license plate holder on the license plate sup-
port.
–
Join the plug-in connector of the license plate lamp.
–
Connect the plug-in connector of the left turn signal which
is marked red.
–
Connect the plug-in connector of the right turn signal
which is marked green.
–
Mount and tighten screws
bo
.
D02151-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.