KTM 2015 200 Duke, Руководство пользователя

Страница: 105 / 177

13 WHEELS, TIRES
103
B00744-10
Main work
(Option: Without ABS)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing. x
–
Clean and grease the shaft seal rings

and mating surfaces

of the spacers.
Long-life grease ( p. 167)
–
Insert the spacers.
–
Clean the thread of the wheel spindle and screw

.
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M8 30 Nm
(22.1 lbf ft)
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
–
Take the motorcycle off of the front wheel stand. ( p. 76)
–
Pull the front brake and push down hard on the fork several times to align the fork
legs.
–
Tighten screws  .
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
Finishing work
–
Take the motorcycle off of the rear wheel stand. ( p. 74)