KTM 2015 200 Duke страница 100 Скачать руководство пользователя

Страница: 100 / 177

BRAKE SYSTEM

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.

Preparatory work

–

Check the rear brake linings. (

p. 99)

Содержание 2015 200 Duke


















































































































































































Результаты поиска

Содержание 2015 200 Duke

Отзывы:

Похожие инструкции для 2015 200 Duke

Бренды по названию

Популярные бренды

KTM 2015 200 Duke, Руководство пользователя

Результаты поиска

Содержание 2015 200 Duke

Отзывы:

Похожие инструкции для 2015 200 Duke

Бренды по названию

Популярные бренды