KTM 2015 200 Duke, Руководство пользователя

Страница: 107 / 177

13 WHEELS, TIRES
105
13.4 Installing the rear wheel
x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
(Option: Without ABS)
–
Check the rear hub rubber dampers. x ( p. 106)
B00748-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing. x
–
Clean and grease the shaft seal rings

and mating surfaces

of the spacers.
Long-life grease ( p. 167)
–
Clean the thread of the wheel spindle and nut  .
–
Clean the fixing locations on the brake caliper support and swingarm.
–
Install the rubber damper and rear sprocket carrier on the rear wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Position the rear wheel on the contact surfaces in the swingarm.
–
Push the rear wheel as far forward as possible and place the chain on the rear
sprocket.