KTM 2008 450 XC ATV, Руководство по ремонту

Страница: 8 / 223

IMPORTANT NOTES
6
2IMPORTANT NOTES
Warranty
The maintenance work prescribed in the greasing and service table must be carried out in an authorized KTM workshop and confirmed
in the customer's service record, since otherwise no warranty claims will be recognized. No warranty claims can be considered for
damage resulting from manipulations and alterations to the vehicle.
Fuel, oils, etc.
You should use the fuels, oils and greases according to specifications as listed in the owner's manual.
Spare parts, accessories
Only use spare parts and accessory products that have been released by KTM. KTM accepts no liability for other products and any
resulting damage or loss.
Work rules
When assembling the equipment, non-reusable parts (e.g. self-locking screws and nuts, seals, seal rings, O-rings, pins, lock washers)
must be replaced with new parts.
If a thread locker (e.g.
Loctite
®
) is used for screw connections, follow the instructions for use from the manufacturer.
Parts that are to be reused after being disassembled should be cleaned and checked for damage and wear. Replace damaged or worn
parts.
After finishing the repair and maintenance work, ensure that the vehicle is roadworthy.