KTM 2008 450 XC ATV, Руководство по ремонту

Страница: 118 / 223

2
A
3
4
4
3
3
5
7
6
6
9
8
1
30/ENGINE - WORK ON INDIVIDUAL PARTS
116
19.29
Checking the shift mechanism
600287-01
–
Check sliding plate

in contact areas

for wear.
» If the sliding plate is worn:
–
Change the sliding plate.
–
Check that guide pin

is firmly seated and check it for wear.
» If the guide pin is loose and/or worn:
–
Change the sliding plate.
–
Check the shift fork at leaf

for wear.
Shift fork
Thickness at leaf 4.20… 4.45 mm (0.1654… 0.1752 in)
» If the measured value does not equal the specified value:
–
Change the shift fork.
–
Check shift rollers

for surface damage and cracks.
» If the shift roller has surface damage and cracks:
–
Change the shift roller.
–
Check the shift rail with locking lever

for run-out.
» If there is run-out:
–
Change the shift rail with the locking lever.
–
Check the shift rail with locking lever

for wear on the locking lever.
» If the shift rail is worn on the locking lever:
–
Change the shift rail with the locking lever.
–
Check the seat of the shift roller in bearing

.
» If the shift roller is not seated correctly:
–
Change the shift drum and/or the bearing.
–
Check bearing

for smooth operation and wear.
» If the bearing is stiff or worn:
–
Change the bearing.
–
Check the shift grooves of shift roller

for wear.
» If the shift groove is worn:
–
Change the shift roller.