KTM 125 SX EU 2015, Руководство пользователя

Страница: 47 / 129

11 SERVICE WORK ON THE CHASSIS
45
11.12 Adjusting the play of the steering head bearing
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 39)
–
Remove the handlebar cushion.
B02093-10
Main work
–
Loosen screws

. Remove screw

.
–
Loosen and retighten screw

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws  .
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Mount and tighten screw

.
Guideline
Screw, top steering stem M8 17 Nm
(12.5 lbf ft) Loctite ® 243™
Finishing work
–
Check the play of the steering head bearing. ( p. 44)
–
Remove the motorcycle from the lift stand. ( p. 39)
–
Mount the handlebar cushion.
11.13 Greasing the steering head bearing
x
800010-10
–
Remove the lower triple clamp.
x
( p. 42)
–
Install the lower triple clamp. x ( p. 42)
11.14 Removing the start number plate
L00947-10
–
Remove screw

and take off the clamp.
–
Remove screw

. Take off the start number plate.