KTM 125 SX EU 2015, Руководство пользователя

Страница: 44 / 129

11 SERVICE WORK ON THE CHASSIS
42
11.9 Removing the lower triple clamp
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 39)
–
Remove the front wheel.
x
( p. 71)
–
Remove the fork legs.
x
( p. 40)
–
Remove the start number plate. ( p. 45)
–
Remove the front fender. ( p. 46)
–
Remove the handlebar cushion.
B02088-10
Main work
–
Remove screw  .
–
Remove screw

.
–
Take off the upper triple clamp with the handlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
B02089-10
–
Remove O-ring

. Remove protective ring

.
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
11.10 Installing the lower triple clamp
x
401540-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 121)
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal

is correctly positioned.
–
Slide on protective ring

and O-ring

.
B02090-10
–
Position the upper triple clamp with the steering.
–
Mount screw  but do not tighten yet.