KTM 125 SX EU 2015, Руководство пользователя

Страница: 74 / 129

13 WHEELS, TIRES
72
B02116-11
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M20x1.5 35 Nm
(25.8 lbf ft)
–
Operate the hand brake lever several times until the brake linings are lying correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 39)
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screws

.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
13.3 Removing the rear wheel
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 39)
B02119-10
Main work
–
Press the brake caliper onto the brake disc by hand in order to push back the brake
piston.
Info
Make sure when pushing back the brake piston that you do not press the
brake caliper against the spokes.
–
Remove nut  .
–
Remove chain adjuster

. Withdraw wheel spindle

only enough to allow the
rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Protect the motorcycle and its attachments against damage by covering
them.
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
B02120-10
–
Remove spacers

.