KTM 125 EXC EU 2012, Инструкции по установке, Страница: 5 / 20

SETUP
3
2.1
Unpacking and setting up the vehicle
B00887-01
Packaging 2
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
–
Have a lift stand available.
Lift stand (54829055000)
–
Carefully loosen and remove the footrest mount.
Info
An assistant prevents the motorcycle from falling over.
–
Together with an assistant, take the vehicle off the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
600811-10
Package 12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
–
Have a lift stand available.
Lift stand (54829055000)
–
Together with an assistant, take the vehicle off the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
B00902-01
–
Install the shock absorber. ( p. 8)
600814-01
–
Route the clutch line with the clutch master cylinder toward the front between
the upper and lower triple clamps.
–
Position the fork legs and tighten the screws of the triple clamp.
Guideline
Screw, top triple clamp
(EXC EU/AUS, XC
‑
W)
M8 20 Nm
(14.8 lbf ft)
Screw, bottom triple clamp
(EXC EU/AUS, XC
‑
W)
M8 15 Nm
(11.1 lbf ft)
Screw, top triple clamp
(EXC SIX DAYS) M8 17 Nm
(12.5 lbf ft)
Screw, bottom triple clamp
(EXC SIX DAYS) M8 12 Nm
(8.9 lbf ft)