SETUP
7
B00908-01
(All EXC models)
–
Mount the license plate holder with the license plate lamp, turn signals, and
reflector.
–
Connect the electrical components.
–
Connect the connector of the left turn signal with connector that is marked red.
–
Connect the connector of the right turn signal with the connector that is marked
green.
800035-10
(All 250/300 models)
Warning
Risk of injury
Battery acid and battery gases cause serious chemical
burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open flames. Charge only in
well-ventilated areas.
–
In the event of skin contact, rinse with large amounts of water. If
battery acid gets in the eyes, rinse with water for at least 15 minutes
and contact a physician.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. (
–
Install the battery. (
B00097-01
–
Unpack and mount the
KTM PowerParts
included in the delivery (optional).
Info
Read the accompanying
KTM PowerParts
installation instructions.
–
Apply the label included in the delivery (optional).
101037-01
(All EXC models)
–
Mount the mirror clamps on both sides.
B00909-01
–
Mount and tighten the rear mirror on both sides.
–
Mount the reflector.
–
Position all controls in their exact positions on the handlebar. Tighten all screws.
–
Refuel. (
–
Print out the current
PDI
form found on
KTM DEALER.NET
and perform the delivery
inspection.
