WORK
8
3.1
Removing the seat
B00817-10
–
Remove screw
1
. Lift up the seat at the rear, pull it back and then remove from
above.
3.2
Mounting the seat
B00818-01
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower at the rear
and simultaneously push forward.
–
Make sure that the seat is correctly locked in.
B00817-10
–
Mount and tighten screw
1
of the seat fixation.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
3.3
Installing the shock absorber
B00815-11
(All 125/200 models)
–
Push splash protector
1
to the side and position the shock absorber. Mount
and tighten screw
2
.
Guideline
Screw, top shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701
–
Mount and tighten screw
3
.
Guideline
Screw, bottom shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701
Info
The heim joint for the shock absorber at the swing arm is Teflon
coated. It must not be lubricated with grease or with other lubricants.
Lubricants dissolve the Teflon coating, thereby drastically reducing the
service life.
B00816-11
(All 250/300 models)
–
Push splash protector
1
to the side and position the shock absorber. Mount
and tighten screw
2
.
Guideline
Screw, top shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701
–
Mount and tighten screw
3
.
