ENGLISH
Final steps
Make sure that the silencer is not touching any other parts of the motorcycle.
Remove any grease remains with a soft cloth sprayed with multipurpose lubricative (Motorex Joker 440).
Cleaning prevents stains from baking on to the surface. Do not use aggressive chemical cleaners since they may damage the sticker.
- Fit the seat.
- Fit the side covers on the left and right.
- Fit the exhaust cover.
Test the function of the brakes and suspension. Make sure that all screws are tightened. If the exhaust system is touching the trim or
other parts, readjust the exhaust system or contact your authorized dealer.
When the exhaust system is first put into operation, it is normal for white smoke to be emitted by the muffler! Finally, check the whole
exhaust system for leaks.
Do not stand behind the exhaust when first used!
Maintaining the Akrapovic exhaust system
Clean with a multipurpose lubricative spray (Motorex Joker 440).
A change of color of the exhaust system caused by the high temperature is normal.
Wear and tear of the sound insulation of the silencer depends on the type of engine and your riding style. If you notice any changes
on the outside of the silencer or if the noise level increases, contact your dealer. Check regularly that all screws are tight and the
springs are fitted correctly.
Spare parts:
(1)
ceramic anti-seizing grease
76505099060
(2)
Retaining clamp
69005283130
(3)
Exhaust spring with rubber
57305016000
(4)
Insulating material kit
69005283140
(5)
Repair kit
69005283150
(6)
multifunction nut M5
69008021080
(7)
Cable binder
44011076305
(8)
Collar screw, M8x25
0025080256
(9)
Washer, D8.5
0125080003
(13)
Fairing bracket, type A
69005283060
(14)
Fairing bracket, type B
69005283070
(15)
Exhaust flange gasket
69005005100
(16)
Noise reduction element
69005283020
2
8
9
3
7
1
14
13
15
15
3
3
6
18
16