ENGLISH
17
Remove the screws of the footrest system and fit the fairing bracket
(3)
as
shown in the picture.
Refit the footrest system and tighten the screws (25Nm, Loctite 243).
3
Fit the tank vent hose
(5)
on the front spoiler
(6)
using a cable binder.
5
6
Mark and cut out the exhaust cover as shown in Figure
(A)
.
Mark and cut off the edge of the exhaust shaft as shown in Figure
(B)
.
A
B
Check that the radiator hose is not in contact with the manifold tube. If neces-
sary, align the manifold tube and radiator hose so that these components are
at least 5mm apart.