KTI Networks KGS-2421 Скачать руководство пользователя страница 34

Страница: 34 / 147

Disabled:

Port shut down is disabled.

The default value is "Disabled".

Counter

Counts the number of frames that match this ACE.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Refresh

Click to refresh the page; any changes made locally will be undone.

Clear

Click to clear the counters.

2.3.2.2.2 Rate Limiters

Configuration Description

Rate Limiter ID

The rate limiter ID for the settings contained in the same row.

Rate

The rate unit is packet per second (pps), configure the rate as

1, 2, 4, 8, 16, 32, 64,

128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K,

1024K

The 1 kpps is actually 1002.1 pps.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

-34-

Содержание KGS-2421




















































































































































Результаты поиска

Содержание KGS-2421

Отзывы:

Похожие инструкции для KGS-2421

Бренды по названию

Популярные бренды

KTI Networks KGS-2421, Руководство пользователя

Результаты поиска

Содержание KGS-2421

Отзывы:

Похожие инструкции для KGS-2421

Бренды по названию

Популярные бренды