KTI Networks KGS-2421 Скачать руководство пользователя страница 101

Страница: 101 / 147

possible values.

Port State

The current state of the port. Refer to NAS Port State for a description of the

individual states.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.3.1.3 ACL Status

Configuration Description

User

Indicate ACL user.

Ingress Port

Indicate the ingress port of the ACE. Possible values are:

Any:

The ACE will match any ingress port.

Policy:

The ACE will match ingress ports with a specific policy.

Port:

The ACE will match a specific ingress port.

Frame Type

Indicate the frame type of the ACE. Possible values are:

Any:

The ACE will match any frame type.

EType:

The ACE will match Ethernet Type frames. Note that an Ethernet Type based

ACE will not get matched by IP and ARP frames.

ARP

The ACE will match ARP/RARP frames.

IPv4:

The ACE will match all IPv4 frames.

IPv4/

ICMP

The ACE will match IPv4 frames with ICMP protocol.

IPv4/UDP:

The ACE will match IPv4 frames with UDP protocol.

IPv4/TCP:

The ACE will match IPv4 frames with TCP protocol.

IPv4/Other:

The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.

Action

Indicates the forwarding action of the ACE.

Permit:

Frames matching the ACE may be forwarded and learned.

Deny:

Frames matching the ACE are dropped.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is

1 ~ 15

. When

“

Disabled”

is displayed, the rate limiter operation is disabled.

Port Copy

Indicates the port copy operation of the ACE. Frames matching the ACE are copied

to the port number. The allowed values are

Disabled

or a

specific port number

When Disabled is displayed, the port copy operation is disabled.

-101-

Содержание KGS-2421




















































































































































Результаты поиска

Содержание KGS-2421

Отзывы:

Похожие инструкции для KGS-2421

Бренды по названию

Популярные бренды

KTI Networks KGS-2421, Руководство пользователя

Результаты поиска

Содержание KGS-2421

Отзывы:

Похожие инструкции для KGS-2421

Бренды по названию

Популярные бренды