-27-
The media converter is equipped with SNMP support. It can be managed from remote SNMP manager stations
over SNMP protocol.
SNMP version support SNMP v1, v2c management
Managed Objects
MIB-II
system
OBJECT IDENTIFIER ::= { mib-2 1 }
interfaces
OBJECT IDENTIFIER ::= { mib-2 2 }
ip
OBJECT IDENTIFIER ::= { mib-2 4 }
snmp
OBJECT IDENTIFIER ::= { mib-2 11 }
dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 }
ifMIB
OBJECT IDENTIFIER ::= { mib-2 31 }
RFC
RFC 3418 - Management Information Base (MIB) for the Simple
Network Management Protocol (SNMP)
RFC 1907 - Management Information Base for Version 2 of the
Simple Network Management Protocol (SNMPv2)
RFC 1213 - Management Information Base for Network Management
of TCP/IP-based internets:MIB-II
RFC 1158 - Management Information Base for network management
of TCP/IP-based internets: MIB-II
RFC 1493 - Definitions of Managed Objects for Bridges
RFC 2863 - The Interfaces Group MIB
RFC 1573 - Evolution of the Interfaces Group of MIB-II
SNMP Trap Support
TRAP_COLDSTART - the device boot up trap
TRAP_LINKUP - the port link recovery trap
TRAP_LINKDOWN – the port link down trap
SNMP Settings
The settings are used to configure SNMP function and SNMP trap function.
[SNNP]
Enable / disable SNMP function
[SNNP Trap destination]
The IP address of the target SNMP trap host who is allowed to receive the traps
[SNMP Read community]
The community allowed for the SNMP [
get
] message
[SNMP Write community]
The community allowed for the SNMP [
set
] message
[SNMP Write community]
The community used for the SNMP trap messages sent by the device
SNMP trap function allows the device to send trap message to an SNMP trap host over SNMP protocol when
the associated trap event occurs.
