manualshive.com logo in svg

KTI Networks KGC-320, Руководство по установке, Страница: 25 / 47

Поделиться
Скачать
KTI Networks KGC-320 Скачать руководство пользователя страница 25

 

TPFDX  ON   

Remote TP link in full duplex 

 

 

 

 

OFF   

Remote TP link in half duplex 

 

2.

 

Web management -> Monitoring -> Statistics -> Remote TP [Link] 

 

 

3.5 802.1Q Control Function 

802.1Q Control function allows perform 802.1Q VLAN related operation to the packets passing through the 

media converter according packet contents as follows: 

 

 

 

[Ingress Drop] setting 

The setting is the first filtering mechanism to filter all incoming untagged packets or to filter all incoming 

VLAN-tagged packets. The options are: 

 

Disable

 - 

Disable port ingress drop function 

Untag Only

 - 

All incoming untagged packets and priority-tagged packets are dropped. 

 

Only VLAN-tagged packets are admitted. 

Tag Only

 - 

All incoming VLAN-tagged packets are dropped. 

 

Only untagged packets and priority-tagged packets are admitted. 

 

[Ingress Keep Tag], [Egress Insert Tag] settings 

The settings are used together for packet egress tagging or untagging as table listed below: 

 

Ingress Keep Tag   Egress Insert Tag   

Packet 

Modification 

 

      

-25- 

Содержание KGC-320
















































Отзывы:

Нет отзывов