CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
USER MANUAL AND INSTALLATION
COD. 091052 - REV. 07 - DATE 11/2016
Pag.10 di 45
21.
Compressor Defects
If the compressor makes strange noises or vibrates excessively during operations, check that it is
functioning properly and, if necessary, contact an Authorized Service Centre.
22.
Spare Parts
Use only original spare parts which can be purchased from our distributors. Use of non original
spare parts voids the warranty and can lead to compressor malfunction. Repairs must be carried out
by an Authorized Service Centre.
23.
Pneumatic Circuit
Use hoses, connections and pneumatic tools rated to handle pressures above the operating pressure.
24.
Tank
Never unscrew any tank connections without first checking to ensure that the pressure has been
vented. Never make holes, welds or modifications on the tank.
25.
Compressor Modifications
Never make any unauthorized modifications to the compressor. Such modifications can cause
damage and serious injury. Consult an Authorized Service Centre for any operations.
26.
Using the Compressor for Painting
Never use the compressor in confined spaces or near open flames. Make certain that the work area
is adequately ventilated. In addition, wear a special mask to protect nose and mouth.
THE TERMINALS OF THE ELECTRIC MOTOR ARE STILL LIVE EVEN
WHEN THE COMPRESSOR IS OFF, DISCONNECT THE PLUG FROM THE
ELECTRICAL SOCKET
KEEP THIS MANUAL INTACT AND ON HAND, AVAILABLE TO ANYONE
USING THE COMPRESSOR!
WE RESERVE THE RIGHT TO MAKE ANY MODIFICATIONS WE DEEM
NECESSARY WITHOUT PRIOR NOTICE!