KTC ABX70, Инструкция по эксплуатации, Страница: 16 / 18

16
under Cap. Fasten Cap to Lock Position again and the removing air operation
is completed.
(3) Turn Switch Lever to Discharge (
排気
) to remove the remained air from Tank,
then turn to Neutral (
中立
) to prepare next operation.
8. HOW TO MAINTAIN & STORE
･
Turn Switch Lever to Neutral (
中立
).
･
Clean Pressure-Sending Hose and Socket Coupler and roll on Hose Hunger for
storing.
･
Clean Body and put the cover on that and store in not humid place.
･
Clean Attachment and Clamp, and store them in Attachment Case.
NOTE
･
As for Attachment A2,B1,B2, do not loosen Adj. Nut too much when storing
them.
･
Disconnect Socket coupler with Attachment when storing, otherwise brake
fluid remained in Pressure-Sending Hose may leak.
･
Check the drain plug regularly. If needed, take out the drain.
･
Pressure-Sending Hose and Plate Rubber & Expansion Rubber of Attachment will
be consumed. So when the deterioration such as cracking on surface is noticed,
change with spare parts.
9. SPARE PARTS
Description Item No.
Attachment A1
Attachment A2
Attachment B1
Attachment B2
Clamp D1(Crow Type)
Clamp E1(Chain Type)
Press-Sending Hose
ABX70-A1
ABX70-A2
ABX70-B1
ABX70-B2
ABX70-D1
ABX70-E1
ABX70-L1