KTC ABX70 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 18

KTC ABX70 Скачать руководство пользователя страница 11

11

(3) Put Clamp D1 on Lock Nut of B1 or B2 making the master cylinder and Claw

at  right  angle.  Fit  Shaft  in  Inner  Groove  (B1)  or  Outer  Groove  (B2)  and  take
the balance of left and right Claw and hitch Claw on the guard. Turn Lock Nut
counter-clockwise  until  locked  to  fix  Attachment  on  the  reservoir  by  Plate
and Claw.

NOTE

･

Make sure to fit Shaft of Clamp D1 in the same position on left and right.

Otherwise, brake fluid may leak.

For some Toyota models which has a rib in the reservoir and Expansion

Rubber cannot be put in the reservoir, please apply the following method.

1.

Turn Adj. Nut clockwise to pooch Expansion Rubber to be close to the
bore of the reservoir port.

2.

Put Expansion Rubber into the reservoir until contacting the rib. Turn
Adj. Nut to be locked. It is OK even if there is a slit between Plate and the
guard.

3.

Hitch left and right Claw evenly on the guard and turn Lock Nut until
Plate contacts the guard.

«
...
9
10
11
12
13
...
»

Содержание ABX70



















Отзывы:

Нет отзывов