Please do not hesitate to contact us for technical assistance whenever you come across the problems
you can not work out or you may deem difficult to fix.
3. Technical Specifications
Environment to which the Product is Subject
* The surrounding temperature range: When welding: -10~+40°C.
During transport or in storage: -25~+55°C.
* Relative humidity: when at 40 °C:
≦
50%.
when at 20 °C:
≦
90%.
* The dust, acid and erodible materials in the air can not exceed the amount required by the norm (apart
from the emissions from the welder ). No violent vibration at the job site.
* Altitude no more than 1,000m.
* Sound ventilation: Make sure of a more than 50cm space left near the welders.
* Keep from raining when it is used outdoor.
* The pressure of the water cooling should guarantee the required flow, the water quality should accord
with the standard of the industry water.
* The wind speed should no more than 1m/s around the operation places.
Requirement for Main Supply
* The voltage oscillogram should display actual sine wave, the oscillation of the frequency should not
exceed ±1% of the rated value.
* The oscillation of the supplied voltage should not exceed ±15% of the rated value.
Welder’s Principle
(see following picture)
The 410-PROTIG20 welder applies advanced IGBT(insulated gate bipolar transistor)and rapid
recovery diode as it’s the main power piece of the power transformation and transfer, with which the
arc can be minutely controlled. It is also assisted with gas pre-flow
、
gas post-flow and non-contact
high frequency pilot, all which contribute to the machine with the feature of high reliability and fast
dynamic response speed and stable arc.
Welding machine by air switch SW - SPST single-phase 220 v alternating current (ac) power frequency, the BD1
single-phase rectifier bridge rectifier and capacitor C1 C2 C3 filtering into direct current (dc), via the IGBT (Q1, Q2
Q3 Q4) consisting of a full bridge inverter ac inverter into to 36 KHZ, then through intermediate frequency
transformer T1 transformer, the quick restore tube D1, D2 D3 D4 D5 D6 D7 D8 rectifier, output steady dc power
Rectifier
Filter
Inverter
Function
Transfor
m-ation
High Frequency
Rectifier
Drive
Modulate
Trait
Control
Protection
Inspect
Process
Control
Current
Adjustment
Sampling